– Chase Tone Wah Maintenance-

Wah Switch Height Adjustment for Easier Engaging

1. Gently hold the switch inside with your one hand, and loosen the outer serrated nut counter-clockwise with needle noise pliers.

2. Turn the inside nut on the switch a half turn clockwise. A little goes a long way.

3. Reinstall switch by finger tightening the outer serrated nut while making sure the switch body is pressed inside against the shell.

4. Test and if it’s good, you can tighten the outer nut with pliers. You do not need to over tighten or torque the switch body. Snug is fine.

Wah Pot Maintenance

1. A quick spray of DeoxIT or similar electrical contact cleaner is recommended once or twice per year on the carbon track and in the small recess of the wah potentiometer. Operate the wah manually for 20 – 30 seconds to ensure proper cleaning.

Checkout our new Chase Tone™ Tru iCar™ Wah Pot for a maintenance-free solution to your wah needs! 2 million + life cycles! Sealed design never needs cleaning!

Have a question? Contact Us for more details!